Jump to content
Division-M Community


  • Content Count

  • Joined

  • Last visited

  • Days Won


Everything posted by w3wilkes

  1. Hopefully you meant Windows Home Server 2011. As far as I know there is no WHS 2010. On client computer backup it sounds like you have an error in your backup catalog. Have you tried doing a repair function on the client backup database? Here's a link with instructions for doing a repair. https://books.google.com/books?id=MufqJtL2evkC&pg=PT374&lpg=PT374&dq=whs2011+repair+client+backup+database&source=bl&ots=IzpDSmgVGq&sig=ACfU3U1DoLUc-vMk6dlDiUFzcDnvk2j8zA&hl=en&sa=X&ved=2ahUKEwiNztHU9JTnAhWTK80KHXU1BUcQ6AEwDXoECC4QAQ#v=onepage&q=whs2011 repair
  2. You should open a support ticket and ask the question regarding switching drivers. You should also include the info about DB being much slower and refer to this thread. The place to open a ticket is; https://support.division-m.com/hc/en-us/requests/new Be sure to let us know what DB says.
  3. With this type error I would hope that you've opened a support ticket; https://support.division-m.com/hc/en-us/requests/new They will probably give direction on setting some log levels and have you submit logs with the recorded data. Not an excuse, but the developer is in the Sydney Australia area and may be hampered by the devastating wildfires.
  4. I don't understand what the issue is beyond the message? My pool is fine. I can access all my files in the pool, my music server can play any music from my pool, my PC backups go to the pool on my server, etc.. Other than the error message from 3.2 and 3.3 my pool is working fine.
  5. I've not heard an update yet. Have you opened a support ticket? https://support.division-m.com/hc/en-us/requests/new
  6. Sorry that none of us have any help for you. Hopefully Anthony has responded to your support ticket.
  7. I downloaded again and re-installed. It came up as a Modify...
  8. Yes, as far as I know you can downgrade. If you don't have the install you might have to contact support to get a copy of the old version you're looking for.
  9. Hopefully you've opened an issue with details of the error(s) you're getting. https://support.division-m.com/hc/en-us/requests/new
  10. I've got an open issue on this. I think the problem is that DB is expecting to see the Anvil product which is separate. I've not seen any problems though.
  11. V3.2.0.0 installed clean on WHS2011. Up and running now for 1 hour. Used the uninstall / install method and my pool came up fine and all files appear to be accessible.
  12. Did you try doing the old fashioned Control Panel -> Programs and Features and then do the uninstall from there? Did you reference this thread in your ticket? I can't speak for the response, but Anvil isn't their only product. I think the developer does this work part time and where he is in Australia it's currently the weekend.
  13. From what Anthony said in his response you should now be able to open a support ticket for Anvil on this error. See his response above for the link to open a support ticket.
  14. I sent a note to the developer and referenced this thread.
  15. You should get a response if you do a support ticket. Things have been pretty slow on the boards. I would have thought you could uninstall from "Programs and Features" in control panel, but I have no direct experience with Anvil. Here's the support link; https://support.division-m.com/hc/en-us/requests/new
  16. Sure sounds like the drive went south. 2 different times I've had drives fail when I shut my server off and brought it back up later. My typical luck is "bad luck".
  17. Can you try swapping it to one of the other DBn drives and see if it's recognized? This way you can see if the problem follows the drive or stays with the PCIx card.
  18. This has been reported and the developer says it will be fixed in release
  19. I've not seen anything like this. Hopefully the developer will get back to you with some assistance. Let us know what you find out.
  20. A question best asked in a support ticket. https://support.division-m.com/hc/en-us/requests/new
  21. 12GB seems quite large. My total for the log folder is only 428MB. Your best shot for a quick response is to open a support ticket to ask Anthony.
  22. 1- You should release the license for DriveBender on your old server 2- Remove disks and install on new server 3- Install DB software 4- when you reboot after installing DB it should recognize the pool and all should be well 5- reregister your DB license on the new server
  23. You should open a trouble ticket and ask the developer about the cbfs driver and if it has been tested and known to work or not with Server 2019. https://support.division-m.com/hc/en-us/requests/new
  24. Have you opened a support ticket? https://support.division-m.com/hc/en-us/requests/new
  25. Got a reply from Anthony. He said it's been reported by several users and he's working a fix for
  • Create New...