Jump to content
Division-M Community

CBers

Administrators
  • Content Count

    988
  • Joined

  • Days Won

    43

Reputation Activity

  1. Like
    CBers reacted to w3wilkes in Primary Utilization?   
    Don't know why I'm just noticing these things now that I've rebuilt my pool??

  2. Like
    CBers got a reaction from w3wilkes in Cannot delete pool file.   
    I have seen a couple of times that when you delete a file, it doesn't delete and then when you try again, you get the permissions message.

    Rebooting does seem to release some kind of lock on the file and it is then deleted.

    I would suggest raising a Support Ticket for the devs to investigate.

  3. Like
    CBers got a reaction from Eldon.McGuinness in Drive Xtender beta registration now available   
    No, nothing available as yet.
  4. Like
    CBers reacted to w3wilkes in Duplication - Setting to Ignore/Individually Configure Duplication   
    I would suggest that you also open a support ticket, sometimes the devs miss requests in the forum.
    https://support.division-m.com/hc/en-us/requests/new
  5. Like
    CBers reacted to w3wilkes in Find all duplicated primaries in main pool   
    I would have thought that a reboot would have brought the drive back into the pool as long as it's still functional. In the case where you merged it as an existing DB pool drive I'm not sure what to do to clean up the dups. It would be good to open a support request.
    https://support.division-m.com/hc/en-us/requests/new
  6. Like
    CBers reacted to Anthony in Anvil has landed   
    It has been a while coming, but Anvil has finally landed! First up I need to apologise for the delay, we are well behind our intended release date... but so goes the software engineering game.
    So, what's what? Well... the best thing to do is head to https://portal.anvil-fs.com and register. Once you've registered, you can install Anvil via the web interface.
    To get up and running, check out https://support.division-m.com/hc/en-us/articles/360000860976-Installing-Anvil-File-Security and then https://support.division-m.com/hc/en-us/articles/360000861716-Getting-started-with-Anvil (which, is incomplete... but I'm knackered).
    Over the next few days, I'll be posting here and on the blog... in addition to writing up more articles on different aspects of Anvil, so stay tuned. In the meantime, If you have any question, direct them to support - https://support.division-m.com, and we'll address them ASAP.
  7. Like
    CBers reacted to 1971camaroguy in I can't read or write to my pooled drive or folders   
    Anthony replied to me last night, there was some steps I could try in re-installing drive-bender that seemed to fix the issue.
    https://support.division-m.com/hc/en-us/articles/360000568955-Hard-resetting-Pool-Firewall-rules
    Apparently there's a little bug, that he said someone else had issues with too
    But I am good now
    Thanks for everyones replies
     
     
  8. Like
    CBers reacted to w3wilkes in honour windows default browser   
    You should open a support ticket on this issue to make sure the developer sees this.
    https://support.division-m.com/hc/en-us/requests/new
  9. Like
    CBers got a reaction from w3wilkes in Windows Server 2019 support?   
    From Anthony "yes, DB runs fine under Server 2019". 
     

  10. Like
    CBers got a reaction from w3wilkes in Windows Server 2019 support?   
    Probably, but you'd either have to try it yourself, or raise a Support Ticket and ask Anthony.

  11. Like
    CBers reacted to w3wilkes in Primary files > Duplicate after removing hard drive   
    Sound to me like you have plenty of spare space that removing (or having a failure) a drive should be no big deal and the repair should do the job provided there's enough free space on the remaining drives to handle the amount of used space on the removed/failed drive.
  12. Like
    CBers got a reaction from w3wilkes in Pool options for balancing   
    Not currently no.

    Perhaps raise a Support Ticket and see if there's any way of getting it added, as I have 2 pools as well and could possibly utilise separate settings.

  13. Like
    CBers got a reaction from w3wilkes in Primary files > Duplicate after removing hard drive   
    I wouldn't class myself as an expert, just a longtime user, but thanks [emoji23]
     
    Why wouldn't you replace a failed disk?
     
     
  14. Like
    CBers reacted to ruralcricket in Beta v3.0.9.0   
    Late to the game, just installed 3.0.9.0.  All of the SMART statuses are N/A.  The Drive Bender smart service is running.  I've rebooted 2x since install and it's been 24 hours.
    Since I can only post .05mb, here is a link to the screen shots - https://imgur.com/a/anvdJIV
  15. Like
    CBers reacted to Schimi in Beta v3.0.9.0   
    @CBers do you use the "Drive Idle"-future on your Emby Server?
     
    how is your experience? I tried it and I have a big delay if I start watching (HDD spinUp)… 
  16. Like
    CBers reacted to Schimi in Beta v3.0.9.0   
    hmm… now it works since a few days without probs....
     
    maybe it was a different issue that solve after a restart
  17. Like
    CBers reacted to QLink in Drive Bender v3.1.0.0 released   
    Upgraded from 2.8.0.0 to 3.1.0.0
    Windows Server 2012R2
    uninstalled 2.8.0.0
    reboot
    install 3.1.0.0
    reboot
    everything works perfectly fine !
    thanks anthony for another great release !
  18. Like
    CBers reacted to w3wilkes in Primary files > Duplicate after removing hard drive   
    I gather from your post that you have a trouble ticket open?? To me I can't see how a clean install of Win7 and DB will help. The pool drives would be in the same state as soon as DB initialized which would leave your pool in the same state it's currently in. If you don't have a ticket open you should open one as this sounds like it's something that Anthony will need to take a closer look at.
    https://support.division-m.com/hc/en-us/requests/new
  19. Like
    CBers got a reaction from w3wilkes in How to upgrade to 3.1?   
    I installed over the top.

    All worked well and still is.

  20. Like
    CBers reacted to w3wilkes in How to upgrade to 3.1?   
    I uninstalled - booted - installed 3.1 - booted. Worked fine. The uninstall / reinstall doesn't touch your pool drives.
  21. Like
    CBers reacted to Anthony in New blog post - Roon and Smooth Stream using Drive Bender   
    Check it out - https://blog.division-m.com/2019/01/16/roon-and-smooth-stream-using-drive-bender/
  22. Like
    CBers got a reaction from w3wilkes in File encrypted?   
    Not sure there are many CX users here, so it might be best to raise a Support Ticket.

  23. Thanks
    CBers reacted to Anthony in New blog post - Drive Bender v3, arrived… and 2019!   
    Check it out - https://blog.division-m.com/2019/01/04/drive-bender-v3-arrived-and-2019/
  24. Like
    CBers got a reaction from w3wilkes in Beta v3.0.9.0   
    Hiya.
     
    No, sorry, I don't use it.
     
    Have you updated to the Full Release (v3.1) ?
     
    If so, I'd raise a Support Ticket so that [mention=1]Anthony[/mention] can take a look.
     
     
  25. Like
    CBers got a reaction from w3wilkes in Drive Bender v3.1.0.0 released   
    Update to v3.1.0.0 today as well.
     
    So far so good, but I never had any issues in the previous beta.
     
    Keep shovelling the snow [mention=23]w3wilkes[/mention] [emoji301][emoji3]
     
     
     
     
×
×
  • Create New...