Jump to content
Division-M Community

chchia

Members
  • Content Count

    11
  • Joined

  • Last visited

  1. I am getting this alert every time i start my computer, kindly advise how should i resolve it?
  2. https://imgur.com/a/6Tbhl8k i am only allowed to attach max file size 0.05MB, so i uploaded the screen capture to imgur above. my problem is, after some hours, drivebender will become consuming the complete CPU core, although there is no transfer of data going on. i need to restart the PC to make it normal again. i dont have file balancing nor drive firewall enabled. i do have driveidle enabled. i was on 3.0.0.0, and i just installed 3.0.9.0, i will monitor if this is fixed in the latest beta.
  3. Yes, i confirm this solution work for 17074. however the procedure is not working for me. uninstalling and reinstalling just driver is not enough. i need to uninstall the driver, uninstall the program, then reinstall the program. otherwise it will say something like "cannot connect server", because the drivebender service is not starting. anyway. it is work normally now. i hope the future version will fix this.
  4. is it possible to raise a feature request for this? the reason is, I dont want some constantly writing file to be located in SSD. I prefer it to be located in a drive that I am ok if it broken.
  5. thanks, created the support ticket. hope to get some update soon. also i requested to release my license from previous windows due to i formatted the pc caused by drivebender failed....
  6. sorry i had been away for months. ok, i tried to update to latest windows 10 17074 again yesterday, and it have the same issues as 17063. please refer to attached picture. as you can see on the log, the mounting is repeating in the loop, and it is failed. please note that i have this windows 10 17074 reset-ted (reset to default), yet drivebender just cannot mount the drive. install back to previous windows 10 solve the problem. i believe something is different in latest windows 10 version making drivebender not working correctly. since i need to use the pool daily, so i have no intention to update to windows 10 17074 again. in case required, here is my hardware with currently working system: CPU: Intel Core i3-7100 (Kaby Lake-S, S0) 3900 MHz (39.00x100.0) @ 798 MHz (8.00x99.8) Motherboard: ASUS PRIME B250M-A Chipset: Intel B250 (Kaby Lake) Memory: 8192 MBytes @ 1064 MHz, 15-15-15-36 - 4096 MB PC17000 DDR4 SDRAM - Apacer Technology 78.B1GM3.AU00B - 4096 MB PC17000 DDR4 SDRAM - Apacer Technology 78.B1GM3.AU00B Graphics: Intel HD Graphics 630 (Kaby Lake-S GT2) - Integrated Graphics Controller [AsusTek] Intel HD Graphics 630, 1024 MB Drive: Samsung SSD 840 EVO 120GB, 117.2 GB, Serial ATA 6Gb/s @ 6Gb/s Drive: WDC WD30EZRX-22D8PB0, 2930.3 GB, Serial ATA 6Gb/s @ 6Gb/s Drive: WDC WD30EZRZ-00Z5HB0, 2930.3 GB, Serial ATA 6Gb/s @ 6Gb/s Drive: WDC WD30EZRX-00D8PB0, 2930.3 GB, Serial ATA 6Gb/s @ 6Gb/s Drive: WDC WD20EARS-00S8B1, 1953.5 GB, Serial ATA 3Gb/s Drive: WDC WD30EZRZ-00GXCB0, 2930.3 GB, Serial ATA 6Gb/s @ 6Gb/s Sound: Intel Kaby Lake - High Definition Audio / cAVS (Audio, Voice, Speech) [A0] Network: RealTek Semiconductor RTL8168/8111 PCI-E Gigabit Ethernet NIC OS: Microsoft Windows 10 Professional (x64) Build 16299.192 (1709/RS3)
  7. is there a way to assign one folder to be forced to store in one specific drive only?
  8. i had already reverted back to previous windows, but i do know that service DriveBender is hang on "starting service....", while DriveBenderSmart started correctly.
  9. Yes i am on the latest insider build. i confirm DriveBender 2.8 do not work with 17063. reverting back to 17040 and everything is back to normal.
  10. my 16TB pool is now gone, cannot open drivebender despite uninstall and reinstall tried. i dont have problem with Microsoft Windows 10 Professional (x64) Build 16299.192 (1709/RS3) i dont have problem with insider preview up to any build before 17063. i only confirm have problem with insider build 17063 and 17074 so far.
×
×
  • Create New...