Jump to content
Division-M Community
Sign in to follow this  

Smart reporting for disk on H310 flashed to IT mode

Recommended Posts

I needed more SATA ports so I added a Dell H310 raid controller, flashed to IT mode. All the disks attached to it are recognized by the OS and by Drive Bender, but Drive Bender's SMART software is not seeing the SMART data.  I also had this issue with Crystal Disk Info, but resolved it by enabling ATA Pass Through.   Using command line smartctrl.exe from www.smartmontools.org using the command -d SAT enables smart data collection. e.g.

        smartctl -d sat -a /dev/sda    or

        smartctl -d ata -a /dev/sda

Any way to enable ATA pass through?

The HDSentinal site says the H310 is compatible: https://www.hdsentinel.com/compatibility_disk_controllers.php

Also the trial version of HDSentinal Pro does report the drives attached to the Dell H310 card.

Edited by ruralcricket
add command line switch

Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Create New...